Makita MAC700 Big Bore 2.0 HP Air Compressor
- Cast iron pump with big bore cylinder and piston, combined with greater bore and stroke, delivers maximum performance
- Substantially lower noise levels with a large 1,720 RPM pump, enabling greater displacement at lower RPM
- Low amp draw reduces incidences of tripped breakers and voltage drop that can cause premature motor failure
- Oil lubricated provides cooler running pump, minimizes wear
- One-year manufacturer's warranty
ChozeYoung
Highly recommend!
Arrived in perfect condition. Everything just exudes quality. Only quibble that I plan to correct is the routing of the power cord and an air line near the pressure regulator--I just want a little more clearance when adjusting. I'll be replacing that plastic air hose with copper, so I can fix the routing to my preference. I ran the compressor with the included oil for about 45 minutes to ensure a good break-in, because I planned to replace it with synthetic, once break-in was done. Glad I did; the included oil went in clear, but came out quite dirty. If you plan to keep the included oil in the compressor, be aware that using the whole bottle may be just a smidgen too much. I noticed it filled the reservoir a little over the sight glass mark and noticed some oil foaming. Refilled with Royal Purple synthetic compressor oil and noticed immediate improvement in noise level and vibration. Some of it may be due to it being 30 weight vs. 20 weight oil, although my previous experience with RP tells me it's just good stuff. Recommend it as an upgrade, once done with a thorough break-in. Beyond that, nothing bad to say about the compressor's performance. Even handled my 1/2" lug nut gun, although the reservoir tank is too small for extended use without the motor cycling often. It IS heavy, but I accepted that in trade for being quieter and, hopefully, longer lasting.
VictoriaAntionetteChakales
In case you have to replace the pressure switch, or the pressure regulator is leaking
I bought this compressor in 2006 and it is still going strong. I highly recommend it. BUT, I have had to replace the pressure switch on it twice. I am adding this review to advise other users that, if you need a new pressure switch, you do not have to buy the Makita branded switch. Makita does not make the switch. The switch that came with my compressor is actually a Lefoo Air Compressor Pressure Switch Control, 95-125 PSI, 4 Port w/ Unloader LF10-4H-1-NPT1/4-95-125 that has been adjusted for higher cut-in/cut-out pressure. You can find this for sale on Amazon for less than half the price of a Makita switch. The only difference is that the Makita switch comes with a cut-out pressure of 135 psi. The Lefoo switch is factory set for 125 psi cut-out. If you like the 125 psi cut-out, you don't have to do anything. If you prefer the higher cut-out, all you have to do is turn the left adjusting screw clockwise until, by trial and error, the cut-out pressure you want is achieved. Note: this will also raise the cut-in pressure. You can also replace the Makita switch with a Sunny SP-204, L4, 4-port, 95-125 psi. Like the Lefoo switch, it comes factory set to 125 psi cut-out, but you can raise it the same way as the Lefoo switch. BTW, I found that to remove the old switch and install the new, you have to take off the switch cover and also take out the 4 allen head screws that hold the shroud on and move the shroud back a bit, otherwise the switch body will hit the shroud. Note what ports the pressure gauge, air outlet and plug are connected to on the old switch and swap them into the same location on the new switch. One other tip. If air starts coming out from under the adjusting knob of the pressure regulator, it does not necessarily mean that you need a new regulator. It may just have gotten dirty. If you are handy, it is a fairly easy matter to take the regulator apart and clean it. Just be sure to pay attention to how the various parts go together. Clean everything, lightly lubricate all of the o-rings with silicon paste.and reassemble. There is a good write-up on doing this here. (It's for the MAC5200, but the pressure regulator is the same): [...] Hope this helps save you some money.
NigelGorbunow
Reliable, quiet, heavy duty machine
After almost 7 years, this compressor is still going strong and runs just like the day I got it. I have used it for numerous home improvement projects to drive nail guns for hardwood floors, framing and trim. It also keeps the tires on the family cars inflated and I use it to clean engine parts and electronics with compressed air. It is heavy due to the cast iron and thick steel construction--that's a good thing! However, you may need help moving it if you don't have enough upper body/back strength. Just remember to empty the air tank when you are done using it to prevent water build up. Also periodically check the sight glass to ensure their is compressor oil (I have never had to refill it) and this beast will not let you down.
ColleenAnoraConant
Top shelf compressor
If you want a portable air compressor for tire inflation or air nailers this is it. Dont waste your time or money with Sears or Harbor freight. This is top shelf equipment. Unbleavable quiet. Dont listen to the reviews, this thing is extremely quiet. It's not a breaker tripper. 15 amps works fine. Buy it. It's a great compressor.
SarrahJohnson
Best small compressor I have used and purchased to date
This is my....fourth air compressor. My first one was the premium (years ago) air compressor (dual tank) for subcontractors running nail guns, etc. (roofers).....and is 35 years old and still running (but tank is leaking a bit due to rust). I have a HF larger tank compressor for general use....it works surprisingly well and is on wheels but is too large to do "nail work" inside the house (I own a lot of brad, nail, staple and micropin guns). I had the ubiquitous red Porter Cable pancake compressor....liked it fine but after 2-3 years the pressure switch is kaput. And I never cared for its drain valve. So.....since I own a lot of Makita tools and have always been extremely happy and satisfied with them, I decided to spend the money to buy a more quality unit....and I'm not disappointed. Obviously passage of time will be the ultimate judge of the thing but ....aside from the greater weight (than the PC pancake unit), what is there not to like? It is quiet....I prefer wet sump compressors....it doesn't leak any air and it brings it up to pressure rapidly....so far, I love this compressor. Makita continues to meet my standards in a tool. UPDATE: Have now owned it for one year and used it extensively. I love this compressor...probably my favorite tool of all tools that I have purchased. It is unbelievably quiet...especially in a room working next to it....it doesn't leak air, recycles infrequently and reaches working pressure fast. Only caveat is that it's heavy and a little cumbersome to carry. But it is a well engineered machine. It reinforces my high regard for Makita tools.
AliciaFlickinger
Great compressor
Excellent compressor runs very smoothly. Great for home use and will run small demand air tools. I would note that this compressor is very heavy, I am considering putting wheels on it for easy moving. After the 20 minute break in period I would recommend draining all of the oil out of the unit and replacing it with a high quality synthetic compressor oil, after the break in period I did see that the oil changed color to a slightly grey color which is partly due to the piston seating properly and creating some small metal fragments in the cylinder. By removing and changing the break in oil I believe that you can prolong the compressors life by using a fresh oil, thus reducing friction loss. Dewalt sells a high quality compressor oil that I use.
AnitaSamui
Packaging seemed good the oil sealed in its own bag
I ordered the MAC700 Tuesday night and I received it Friday the 13th! I stopped home at noon and it was sitting in my garage waiting for me. Shipped by FedEx from BETHLEHEM, PA to MN it shipped half way across the country with no damage. I did get a little worried when I saw it was shipped in the Makita box but my fears lifted when I opened and seen it was double boxed from the factory. Packaging seemed good the oil sealed in its own bag, oil cap and air filter sealed in another bag, all sealed together with the manual in another bag and was in its own cardboard slot where it couldn't moved around. No Spills of oil anywhere. First thing I did was remove the oil drain bolt to make sure all the factory test oil was out of it, glad I did because tablespoon of dark dirty oil came out. I had to tilt the compressor to get most of the oil out.Then installed the air filter with some teflon tape and added a good part of the bottle of oil that was supplied and started the break in procedure. Ran it for 28 mins before I closed the bottom air receiver valve to start building up pressure ( 0-130 psi in 57 seconds ) The quality of this machine was evident the moment I opened the box up. No damage or scratches. The sound of this compressor is one of the best features it's much more pleasant to listen to then the typical screaming hotdog or pancake compressors. I attached photo comparing the size of the tank to my Jegs aluminum air tank (5 gallon I believe) and also of the double boxed Makita packaging to hopefully ease some of your shipping concerns
SantanaSanchez
Perfection for the home DIYer ...
Got this air Compressor today...wow...small, portable (not necessarily "light") ... build quality looks to be very good ... have broken it in per the instructions (added the included oil FIRST!!!) Easy out of the box set up ... used it to operate some air tool equipment - works for me. As others have mentioned, it will not be suited for commercial applications that require long run times for air tools - but, for around the house DIY stuff - it's perfect. And QUIET?! WOW - it is SO QUIET ... it just hums ... this replaces an air compressor I had for 30 years that finally gave up the ghost ... my old one was noisy, leaked air everywhere and vibrated all over the floor unless it was set on thick rubber padding. I feel like I've died and gone to heaven - thank you, Makita! Another good Makita tool to add to my tool arsenal :) Highly recommend!
JasonRRupe
Good compressor, I'd buy it again.
I've had my compressor for about a year and a half. In that time I've installed baseboard, crown molding, trimmed a large kitchen island, installed a hickory hardwood floor, and installed 20 sheets of 3/8 underlayment for vinyl tile flooring. The underlayment was by far the most taxing project as I fired about 10,000 1 1/4 staples for the install. I've changed the oil 3 times, I change it early and often to prevent wear on the pump. I'm a DIYer, not a contractor. I'm writing this information so you know I've used the compressor as opposed to someone who opened the box, turn it on and then wrote about how much they like it. I'm not sure how they would know if they like, since they haven't really used it. I was not paid or given anything for my review. I'm writing this because I rely on others reviews to decide which products I will buy. The compressor is quiet, as advertised. I have run the compressor a lot with my wife in the house, who is noise sensitive. She doesn't complain about the noise, which is a good sign. The compressor charges the tank quickly. It has been able to keep up and get ahead of my stapler, even when installing underlayment with the stapler in bump fire mode. The compressor cycled often, but I never ran out of air. It seems very well built and the pressure is easy to adjust. The rubber feed do a very good job of protecting finished flooring. Oil changes are quick and easy. The ball vale on the drain is quick and easy to operate. It is very effective in getting water out of the tank, which is critical for the longevity of the tank. The handle makes it easy enough to cary and is a good place to store a coiled air hose. I prefer compressors with oil lubricated cast iron pumps due to the increased durability and longevity, but it does make the compressor heavy. At 52 lbs, its on the heavy side. You'll also want to strap it down or support it in your vehicle, otherwise it will fall over.
LoveDie
Best small compressor I've ever owned
6.5 years in and still works and looks like new. I drain the tank condensation once a month. Still haven't changed the oil, it's still clear and up to the site glass level it should be at. Zero complaints. 2018 June update. This summer I've been building a house and using big nailers. I would love love love to have 10 times the size air tank on this. It would certainly quit cycling every 2 minutes. Still up to any task I've thrown at it though.